Home > Windows Cannot > Event Id 1058 Windows Cannot Access The File Gpt Ini

Event Id 1058 Windows Cannot Access The File Gpt Ini

Contents

We noticed in DNS that the AD-Zone had more than one A-Record for the zone itself with different IP addresses. I compared the GPO-ID from event 1058 to the GPOs, and found the ID referred to the "Default Domain Policy". As note, the gpupdate command took very short time to complete returning to the command prompt right away. - I have verified the permissions on the GPT.INI file and the SYSTEM Alternates as to which DC it afflicts. navigate here

If the inability to route Netbios is your problem, there are two fixes to this: FIX 1) So, here is what you do. C.On the General tab, make sure that File and Printer Sharing for Microsoft Networks is checked. x 111 Anonymous I had the same errors (1058 and 1030 every five minutes) and the ipconfig /registerdns command worked for me. One thing I noticed is that one has to redo the steps above after every Windows.

Windows Cannot Access The File Gpt.ini For Gpo

Applying Microsoft article ME314494 by enabling DFS on the server cured it even though it is designed for XP machines. If you have errors, you need to resolve them. Add them back if you removed them.

x 109 Anonymous After using the VMWare converter to virtualize my windows server 2003 R2 domain controller, I was getting errors with event ID 1058 and 1030. x 73 Anonymous We experienced this error after renaming a domain, using version 1.4 of the Microsoft domain rename tools. Every time I tried to copy (with domain admin privileges) files from a DC to a member server, it would give me an “account disabled” message. Gpt.ini File Location Thanks 0 LVL 74 Overall: Level 74 SBS 64 Windows Server 2003 30 Message Active 1 day ago Expert Comment by:Jeffrey Kane - TechSoEasy ID: 224857472008-09-16 Running the change IP

As stated previously, dfsutil /PurgeMupCache also solved my problems. Windows Cannot Query For The List Of Group Policy Objects Server 2003 Replmon (from Windows Support Tools) has shown me the two versions of the GPO. Put in the IP address for your domain controller (the local IP address should be first in the list), and then next to the IP address do not put the host I like what I see so now i am following you.

Privacy Policy Support Terms of Use Daryl Hunter - Network Cowboy Random musings on technology, leadership, family, faith and bacon. Userenv 1058 and it was no fun... I rebooted and the errors did not reappear. The error stopped within five minutes on the DCs.

Windows Cannot Query For The List Of Group Policy Objects Server 2003

As per Microsoft: "These issues may occur when the Distributed File System (DFS) service is stopped on the domain controller". It would only occur on the second DC. Windows Cannot Access The File Gpt.ini For Gpo Whenever I opened Active Directory users and computers, right click on the domain name and click properties, and then click on the group policy tab, an error popped up saying “no What Is Gpt.ini File Click OK twice to test the issue.

To see these settings on a domain controller go to Start -> Run, and enter MMC. check over here Jeff TechSoEasy 0 LVL 38 Overall: Level 38 Windows Server 2003 33 SBS 9 Message Expert Comment by:ChiefIT ID: 218630992008-06-24 Netbios is a non-routable protocol. Also, if SMB signing policies are set by the default domain controller security policy, the problem affects all the domain controllers on the network. x 74 Anonymous We have two Domain Controllers and we received 1030\1058 errors every 5 minutes on our primary DC as many people have. Windows Cannot Access The File Gpt.ini For Gpo Cn= 31b2f340-016d-11d2-945f-00c04fb984f9

Going in the DNS zone config for the zone (WINS tab), only the DC that was down was listed under the "Use WINS forward lookup" option. Then... x 4 EventID.Net The following comments are applicable to this event with "Access denied" as error code for the {31B2F340-016D-11D2-945F-00C04FB984F9} group policy (Default for a domain) on a Windows 2003, SP1 his comment is here About Advertising Privacy Terms Help Sitemap × Join millions of IT pros like you Log in to Spiceworks Reset community password Agree to Terms of Service Connect with Or Sign up

from the command line. Kb840669 Jeff TechSoEasy 0 Message Author Comment by:stako_ex ID: 224853522008-09-15 Please leave this question open, I will try the solution proposed. x 189 Anonymous In my case the solution was quite easy.

The system must have left this setting alone after the upgrade from Win2k.

If you have a route to go over, then you should use WINS as the transporter. Contact the administrator of this server to find out if you have access permissions.Configuration information could not be read from the domain controller, either because the machine is unavailable, or access English: This information is only available to subscribers. Kb885887 A data value of 1 disables the client. 3.Press OK and exit the Registry Editor. 4.Verify that File and Printer Sharing for Microsoft Networks is enabled on the interface: A.Start /

x 58 Anonymous I was having this problem on a 2008 DC newly promoted. For example, if you have the domain "mydomain.local" you have to edit the hosts file on each DC as follows: mydomain.local 10.0.0.1 # local DC mydomain.local 10.0.0.2 # second DC mydomain.local I ensured that there are no errors in the event log and then went back and set the GPOs to the same settings they were before. weblink See WITP82658, ME555040, and the link to "Deployment considerations for Group Policy" for details.

The first event after the last 1030/1058 pair following it by 6 minutes was a SceCli 1704 policy refresh. Reply ↓ watch dogs trailer August 1, 2013 at 10:12 PM Great post. Some other recommendations in regards to this (from newsgroup posts) is to verify that: - DFS service on all DCs is started and set to "Automatic" - there are no FRS Setting it back fixed my problem.

So, there are drawbacks to using DNS. 0 LVL 38 Overall: Level 38 Windows Server 2003 33 SBS 9 Message Expert Comment by:ChiefIT ID: 218631222008-06-24 Since Jay Jay is already Join & Ask a Question Need Help in Real-Time? Really?  WINNT?  What decade is this? Rebooting both DCs at the same time would sometimes get this to stop, but recently it just would not quit after installing security updates.

So, what else could I do to fix this error??? 0 Message Author Comment by:stako_ex ID: 219718452008-07-10 Oh, about the 192.0.0.xxx subnet... Anyway, without trying to figure out who/what/why, I simply removed that junction point and re-added it with "mklink" like so Then, I did a "gpupdate /force" to force a Group Policy x 4 Richard Righart van Gelder This error started on Monday after rebooting our SBS2003 server. See ME830676 for more details.

© 2017 jscience.net